Posted: 04-10-2009 , 08:12 AM #1 | |
Member
Join Date: Jul 2006
Location: Kilkenny
Posts: 234
|
How do I get a smooth finish?
Hi all I've decided to revamp a few pieces of furniture lying around to be used in other rooms.
My first project was a pine single bed for my son, I sanded it down, then washed it down and let it dry, applied a coat of undercoat to the bed then finished it with three coats of satinwood paint in french white, but the surface is not totally smooth. I used a gloss roller head to put on the satinwood. Would spraying give a better finish. Its just that I've got a lovely unit that I want to paint french white for my sitting room and we're also getting rid of our red deal skirting and door and repainting them too. I want to get a perfect finish. All help and tips appreciated. |
JumbleTown Sponsored Links |
|
Posted: 04-10-2009 , 09:17 AM #2 | |
Member
Join Date: Apr 2009
Location: Cavan/Dublin
Posts: 347
|
Hi, it helps if you give each coat of of paint a light, very light sanding before applying the following coat.
I'm not sure what else you could do, but good luck with it, I plan to revamp my sons room so very interested in ideas. |
Posted: 04-10-2009 , 12:18 PM #3 | |
Member
Join Date: Oct 2006
Location: Nenagh, Co. Tipperary
Posts: 505
|
smooth finish
Tip from the trade..........
If you're using a gloss roller on furniture make sure you use one of the foam rollers (not the one with light pile). It also helps if you use a brush to lightly feather the paint after you use the roller. Regards, fries |
Posted: 12-10-2009 , 01:43 PM #4 | ||
Member
Join Date: Oct 2009
Location: Kilkenny City
Posts: 109
|
Smooth finish
Quote:
|
|
Posted: 12-10-2009 , 02:28 PM #5 | |
Member
Join Date: Jul 2006
Location: Kilkenny
Posts: 234
|
revamp
We're currently sanding down our skirting and door and going to repaint we've decided on French cream from the colour trend range.
|
Posted: 31-10-2009 , 06:27 PM #6 | |
Member
Join Date: Jul 2006
Location: Kilkenny
Posts: 234
|
quick question
Just moving onto my next project a coffee table which I'm painting cream. Its been a learning curve but is there a special undercoat I should use or can I just use the a normal wood undercoat that I did the skirting and doors with and what is the best finish, I used satinwood on my dresser but not 100% happy with. Is there a special paint for furniture just want to get the coffee table right.
|
Posted: 31-10-2009 , 06:33 PM #7 | ||
Member
Join Date: Oct 2009
Location: Kilkenny City
Posts: 109
|
Coffee table
Quote:
B/ Pop over to Woodies, Crown do a lovely Satinwood and of course other colours, C/, Sand, Prime, Undercoat, and finish. A very light sanding between coats |
|
Posted: 31-10-2009 , 07:35 PM #8 | |
Member
Join Date: Jul 2006
Location: Kilkenny
Posts: 234
|
Coffee table
Thanks Bill I've almost finished sanding it, its got spindle type legs so tricky enough to get the layers of paint off it.
Now here's my stupid question whats the difference between priming and undercoat, I thought they were the same thing. And finally should I roll, brush, or spray? |
Posted: 01-11-2009 , 07:38 AM #9 | |
Member
Join Date: Oct 2009
Location: Kilkenny City
Posts: 109
|
Priming and undercoat
Priming, you prepare the surface for the paint, undercoating, you're giving the paint a base, would you like to borrow my heat gun, for the difficult areas, it'd save a lot of time and ensure you get rid of all the old paint etc.
I'm also in Kilkenny, near to Newpark shoppin center. |
Thread Tools | Search this Thread |
|
|